Dismantling Instruction Pictures
7. Disconnect two connectors by
soldering iron ,then take out the two
speakers
8. Take off the two screws as
showed, then unplug cable on the
board ,then take out battery
9. Take off the 4pcs screws as
showed, then take out usb cover
10.Unplug the cable on the USB
b
oard .and then take out usb cover
11. Unplug 4pcs cables as
showed,and then take out main
board
12. Take off the rubber button
pad following the direction.
Take off two
To Next Page
Loading...
