One step at a time...
1. Remove stylus cover - be careful around the needle!
2. Ensure Anti-Skate is set to 0
3. Unclip the tonearm from the rest
4. Ensure the arm lift is in the down position
5. Rotate the counterweight until the arm floats (it should not go keep going up or down)
6. Set the counterweight dial to 0 at the top (careful not to move the counterweight)
7. With the dial at 0, rotate the counterweight 1 full turn anti-clockwise (so the counter-
weight moves toward the cartridge)
8. Set the Anti-skate dial to 3.
BALANCE THE TONEARM
1
2
3
4
5
6
7
8
To Next Page
Loading...
General