Harman Soundcraft Vi1000 - Shows

Vi1000 USER MANUAL
16.2 16.2 MENU > SHOWS
16.2 MENU > SHOWS
Load Show
Load the selected show
from the hard drive.
Shows can only be loaded from the internal hard drive,
they must be imported from the external storage rst.
NAME
Rename the selected
Show le.
Opens up the text entry screen.
Delete Show
Delete the selected
Show le.
An additional screen will appear asking you to conrm
the deletion or cancel it.
Save
Update the loaded
Show le.
A conrmation dialogue will appear.
Save As
Save all current show
parameters as a new
Show.
You will be prompted to input a new show name via the
on-screen keyboard or an external USB keyboard.
Show Defaults
Display the default
Shows in the Show le
list.
The console comes with some factory-installed shows.
These are not normally visible in the list, but they can
be seen by pressing the (SHOW DFLTs) button. The
default Shows are at the top of the list and are shown
in italic text. They cannot be deleted with the (DEL) key,
nor renamed. If you want to base your Show on one of
the defaults, you MUST save it as a new show before
you start working, otherwise you will not be able to
store Snapshots. This is because of the write-protection
assigned to the default Shows.