Vi1000 USER MANUAL
18.2.1 18.2.1: VM ² > STATUS > CHANNEL STRIP
18.2.1: VM ² > STATUS > CHANNEL STRIP
The input channel Input block graphic - shown at the top of the channel strip in the Vistonics touchscreen area,
provides instant feedback on the status of VM² microphones via icons for each of the monitoring elements.
Channel Strip Status (Touch Screen Input Block)
Microphone
Muted
Shows microphone
muted state.
Shows red ‘MUTE’ icon in place of RF indicator, if the
AKG or SHURE mic is switched to muted state. When
unmuted, this indicator icon disappears.
Microphone
clipping
Clipping indication
A red ‘C’ is displayed momentarily if the audio within the
wireless mic audio path reaches full scale. The audio
level at the receiver is indicated by the yellow bargraph.
Radio Frequency Strength
(replaced by microphone or receiver
mute indication when active)
Clipping Indicator
Battery Level IndicatorAudio Level MeterRF Level Meter
To Next Page
Loading...
