Vi1000 USER MANUAL
18.2.2 18.2.2: VM ² > STATUS > VST
18.2.2: VM ² > STATUS > VST
Gain Display
Internal gain of the
connected wireless
microphone.
The display of internal Gain of the AKG microphone
differs according to the type of microphone system being
monitored. It cannot be controlled from the console.
For WMS4500 systems the indicator displays the
user-adjustable audio gain. For DMS700 systems the
indicator shows the output trim level of the receiver. For
SHURE ULX-D/QLX-D and Sennheiser 6000-series, the
receiver output level is displayed and controllable.
Locate
Activate the Locate
function on the selected
wireless receiver.
Pressing this will cause the front panel display of the
chosen receiver to ash, allowing it to be more easily
identied among a rack of others.
RF Strength
Radio Frequency signal
strength.
Shows signal level in bargraph and dB readout. For
SHURE and Sennheiser receivers, two RF meters are
shown, together with a diversity indicator.
Sennheiser receivers also display a LQI (Link Quality
Indicator) which shows a combination of RF and
audio quality.
Battery Level
Remaining battery life
as icon and numerical.
The remaining battery life numerical info in hours is only
a guide, and depends on the type of cells used.
The battery icon gives an accurate picture of the
current state.
RECV/DESK
GAIN
Allows display and
control of either console
preamp gain, or
wireless receiver gain.
This control only appears if the wireless receiver is
connected to a mic input on the console. If a line or
digital input is used, the receiver gain is
permanently displayed.
To Previous Page
Loading...
