6.5.1 6.5.1: INPUT CHANNEL > INPUT
Vi1000 USER MANUAL
6.5.1: INPUT CHANNEL > INPUT
LO CUT Cut-Off
Frequency
Field / Group: LO CUT Range Low Range High
Adjusts the LO CUT
cutoff frequency
This is part of the digital (post AD) LO CUT / HIGH CUT
section and affects all inputs. The affected frequency
range is shown graphically in the EQ section of the touch
screen.
20Hz 600Hz
LO CUT IN Field / Group: LO CUT Range Low Range High
Switch the digital LO
CUT lter in and out
When the digital LO CUT lter is switched in, the LO
CUT indicator above the response graph in the EQ touch
section is highlighted in blue.
Out In
HI CUT Cut-Off
Frequency Field / Group: HI CUT Range Low Range High
Adjusts the HI CUT lter
cut-off frequency.
This is part of the digital (post AD) LO CUT / HIGH CUT
section and affects all inputs. The affected frequency
range is shown graphically in the EQ section of the touch
screen.
1kHz 20kHz
HI CUT IN/OUT Field / Group: HI CUT Range Low Range High
Switch the digital HI
CUT lter in and out
When the digital HI CUT lter is switched in, the HI CUT
indicator above the response graph in the EQ section of
the touch screen is highlighted in blue.
OUT IN
Channel Pairing
Selection
Field / Group: PAIR-
ING Inactive Active
Activate channel pairing
selection on touch
screen.
The touch screen will show pairing candidate options for
the channel - these will be consecutive channel numbers
(horizontal neighbours) and the corresponding chan-
nels on higher and lower layers (vertical neighbours).
All channel parameters will be copied to the selected
pairing candidate and the pairing FORMAT eld will be
displayed.
No Selection
Channel
Selection
Pairing Format
Selection
Field / Group: FOR-
MAT Range Low Range High
Adjusts stereo format of
paired channels.
The choices are LR, RL, LL, RR, MONO. If the channel
is not paired, the FORMAT eld will not be displayed.
LR MONO
To Next Page
Loading...
