Harman SoundCraft Vi3000 - Page 69

4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
®
7.0 7.0: OUTPUTS
7.0: OUTPUTS
There are 24 congurable output busses on the Vi 3000, plus the Master Left, right, and Center (LRC) busses. You
can choose to assign any of the 24 busses as mono OR stereo Auxilliaries or Groups with full processing. You can
create stereo busses with no reduction in the total number of available busses (24 busses are available regardless of
whether they are mono or stereo).
Up to 16 busses can be congured as mono or stereo Matrix (MTX) outputs with full processing, each with up to 24
congurable sources (including busses) - effectively creating up to 16 24-source mixes. Most of the references in this
chapter refer to the Auxilliary and Group assignments. For the full Matrix system reference please see the Matrix refer-
ence chapter 9.
In normal operation (Output Fader Pages A, B, C, and User views) bus master output controls are mapped to the
VST encoders in the Master Bay Vistonics screen over two pages. Use the [PAGE A] and [PAGE B] buttons to switch
between those pages.