Harman XXV - Automatic Ignition;Operation; Room Temperature Mode; Stove Temperature Mode

Harman® •  Owners anualR2 • 200 - • 0811 8 3 -9 0 -0 0 6 8 4 c
Theglassusedinyourstoveismanufacturedtoexactstandardstowithstandthehighheatofthere,butlikeallglass,it
mustbetreatedwithcommonsenseandcare.Neverabusetheglassbyslammingthedoorshutorstrikingtheglasswith
aheavyobject.Iftheglassisbrokenordamaged,donotoperatethestoveuntilithasbeenreplaced.
G lass - R eplacement
If the stoves glass is cracked or broken, you must replace it before operating your stove. Remove pieces carefully. Replace
glass only with Harman® replacement glass do not use substitutes.
Carefully remove damaged glass, gasket material, and hold down clips (set aside).
Install the self adhesive 1 gasket material around the front face of the glass. Set the glass panel and gasket gently onto
the door. Install the hold down clips and tighten with bolts.
G lass - Cleaning
Sometimes it will be necessary to clean accumulated ash from the glass surface allowing this ash to remain on the glass
for long periods can result in etching due to the acidity of the ash. Never clean the glass while it is hot, and do not use
abrasive substances. Wash the surface with cool water, and rinse thoroughly. You may wish to use a non-abrasive cleaner
specically designed for use on stove glass. In any case, dry thoroughly before relighting your stove.
GlassGasket
Replaceglassonlywithhigh
temperatureceramicglass.
Inspectdoorgasketduring
cleaningandinspection
D. G lass Maintenance