IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement
parts for your appliance please provide model number and serial number. All parts listed
in this manual may be ordered from an authorized dealer.
5” Double Blade 3-20- 502221
Control Board 1-00-05886
Glass Door 3-40-677000
Glass Rope 1-00-1186258229
Igniter 3-20-677200
Igniter Cradle, Holder, & Flat Bottom 3 Sets 1-00-06620
Touch Paint, Enamel Brown
Pre 008206292 3-42-6252
Post 008206292 855-1450
Touch Up Paint, Bronze 3-42-00019
Bolt, Case Hardened Zinc Flange, 1/4-20 x 3/8 Pkg of 50 3-30-2000-50
Bolt, Grade 8.2 Zinc Flange SAE, 1/4-20 x 5/8 Pkg of 50 3-30-2002-50
Nut, Zinc Plated Serrated Flange Lock, 1/4-20 Pkg of 100 3-30-8024-100
Nut, Grade 5 Zinc Plated Finished Hex, 5/16”-18 Pkg of 100 3-30-8005-100
Nut, Grade 8 Yellow Zinc Finished Hex, 5/16”-18 Pkg of 100 3-30-8006-100
Screw, Hex Washer Head TEKS Drill and Tap, #8-18 x 3/4”
Pkg of 100 3-30-5003-100
Screw, Alloy Steel Black Oxide Cup Point SSS, 1/4”-20 x 1-1/2”
Pkg of 25 3-30-2011-25
Screw, Alloy Steel Black Oxide SocketHeadCap,1/4”-20 x 2-1/4”
Pkg of 50 3-30-3006-50
Screw, BLK OX, HWH TCS 10-24X1/2 Pkg of 100 3-30-1101-100
Screw, Grade 5 Zinc Plated Hex Cap, 1/4-20 x 1” Pkg of 50 3-30-1115-50
Screw, Grade 5 Zinc Plated Hex Cap. 3/8-16 x 1/2” Pkg of 50 3-30-1132-50
Screw, Hex Washer Slot T23 Zinc Thread Cutting ,1/4-20x5/8”
Pkg of 50 3-30-1111-50
Shim Set Pkg of 4 2-00-677027-4
Washer, Zinc Plated USS Flat Washer, 1/4” Pkg of 100 3-30-0202-100
Washer,External Lock, 5/16” Zinc Plated Pkg of 100 3-30-0303-100
To Next Page
Loading...
