Harmonic Ellipse 3100 - 6.5.4.2 Sample Rate (MPEG-2 AAC LC)

Chapter 6 Audio Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 190 Ellipse 3000 Release 3.0, Rev. B
Coding Scheme Configuration
6.5.4.2 Sample Rate (MPEG-2 AAC LC)
The Sample Rate parameter sets the current sampling rate for the incoming MPEG-2 AAC LC
encoded audio signal. This parameter is used to define the incoming audio quality of the audio
input element device (A/D, digital receiver).
The available options are:
■ 32
■ 44.1
■ 48 kHz
The MPEG-2 AAC LC Sample Rate default value is 48 kHz.
Front Panel
To set the MPEG-2 AAC LC Sample Rate parameter on the front panel:
❖ Navigate
Root > Configuration > Audio > [Audio Channel] > MPEG-2 AAC-LC Parameters >
Sample Rate.
Web Manager
To set the MPEG-2 AAC LC Sample Rate parameter in the Web Manager:
❖ Select Audio > Aud# and access the MPEG-2 AAC LC Parameters box.
Sample Rate
1 ‚ 32 kHz
2 ‚ 44.1 kHz
3 ƒ 48 kHz