RF-5800H 125-WATT COMMUNICATION SYSTEM
APPENDIX A
A-3
Table A-3. RF-382A Specifications – Continued
Function
Specification
MIL-STD-167-1 Type I (sinusoidal resonance search) for shipboard equipment
SHOCK
MIL-STD-810E Method 516.3, procedure I (functional shock) for ground mobile
equipment (40 G, 11 ms sawtooth); procedure VI (bench handling shock)
for equipment experiencing bench-type maintenance
Temperature MIL-STD-810E, Method 501.2, procedures I and II (storage at 70° C
and operation at 65° C); Method 502.2, procedures I and II (storage and
operation at -40C)
Humidity MIL-STD-810E; Method 507.2, procedure II (0 to 100% relative
humidity at 65° C)
Altitude MIL-STD-810E; Method 500.2, procedures I and II (storage and
operating to 15,000 ft.)
Salt Fog MIL-STD-810E; Method 509.2, procedure I (5% salt solution)
Dust MIL-STD-810E; Method 510.2, procedures I and II (blowing dust and
sand)
Rain MIL-STD-810E; Method 506.2, procedure I (blowing rain)
Leakage MIL-STD-810E; Method 512.2, procedure I (basic leakage-immersion)
Accessories RF-2066 Antenna Base Plate Kit
RF-285-04 Mounting Tray
RF-382/SSK Site Spares Kit
RF-382/ARK Assembly Repair Kit
RF-382/MRK Maintenance Repair Kit
Table A-4. RF-5056PS DC/DC Power Converter Specifications
Function
Specification
Input Voltage 12 to 28 Vdc nominal
Output 26.4 Vdc at 22 A
Efficiency 75% minimum at full load with an input voltage of 25 to 30 Vdc
Load Regulation 300 mV
Line Regulation 50 mV
Output Current Duty Cycle 4:1 RX/TX
Size 7.5 W x 12.75 D x 3.3 H inches (19.1 W x 32.4 D x 8.38 H cm)
Weight 11 lbs. (5.0 kg)
Temperature Range –55° C to +70° C (–67° F to +158° F)
Environmental MIL-STD-810E
To Next Page
Loading...
