Quick Guide
10515-0372-4100
Rev. E, Oct/12
Unity
®
XG-100P
Full-Spectrum Multiband Radio
Radio Overview
Select Channel and Bank
Select channel.
Select bank.
For detailed operating information, refer to Operator’s Manual
10515-0372-4200, available at www.pspc.harris.com.
NOTICE!
The material contained herein is subject to U.S. export approval. No export or
re-export is permitted without written approval from the U.S. Government.
Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations
15CFR774, Export Administration Regulations.
Main Display Overview
Main Menu
Use the navigator to highlight and select a menu item.
Press 1 - 9 on the keypad for direct access to menu items. Refer
to operations manual (10515-0372-4200) for complete menu
descriptions, including SEC (3), MSG (8), and UTIL (9).
Icons
Trunked Signal Strength
Bluetooth On
TX Power
Bluetooth Connected
Receive Signal Strength
Secure Traffic
Channel Idle
Global Encryption
Transmitting Encrypted
GPS Tracking
Failsoft
Monitor On
Nuisance Channel
OTAR Disabled
Receiving Data
OTAR Registered
Transmitting Data
OTAR Registering
Virtual Site
OTAR Rekeying
Battery Level
Talkaround Enabled
Low Battery
Transmit Power Level
Very Low Battery
RX Only
Battery Exhausted
Noise Cancellation Enabled
Battery Charging**
Speaker Muted
Battery Fully Charged**
VDOC
RX Mail
Vote Scanning
TX Disabled
Scanning Enabled
Tones Disabled
Alert(s) Present
PTT Disabled
Emergency
** Smart Battery Only.
Icons (Continued)
Unselected Emergency Unit Selected
Selected Emergency Unit Unselected
Select Zone
Select ZONE from main menu and scroll up and down to select
zone. C indicates Command Tactical Zones and Z indicates
Mixed System Zones. Mixed System Zones are only available if
configured in RPM.
Activate Mission Plan
Popup option menu
From the PROGRAM menu,
highlight and select a mission
plan.
Select ACTIVATE PLAN,
VIEW PLAN INFO, or
CLONE PLAN on the popup
menu. See the Operator
Manual for more information
on the Clone Plan feature.
Quick Guide
10515-0372-4100
Rev. E, Oct/12
Unity
®
XG-100P
Full-Spectrum Multiband Radio
Radio Overview
Select Channel and Bank
Select channel.
Select bank.
For detailed operating information, refer to Operator’s Manual
10515-0372-4200, available at www.pspc.harris.com.
NOTICE!
The material contained herein is subject to U.S. export approval. No export or
re-export is permitted without written approval from the U.S. Government.
Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations
15CFR774, Export Administration Regulations.
Main Display Overview
Main Menu
Use the navigator to highlight and select a menu item.
Press 1 - 9 on the keypad for direct access to menu items. Refer
to operations manual (10515-0372-4200) for complete menu
descriptions, including SEC (3), MSG (8), and UTIL (9).
Icons
Trunked Signal Strength
Bluetooth On
TX Power
Bluetooth Connected
Receive Signal Strength
Secure Traffic
Channel Idle
Global Encryption
Transmitting Encrypted
GPS Tracking
Failsoft
Monitor On
Nuisance Channel
OTAR Disabled
Receiving Data
OTAR Registered
Transmitting Data
OTAR Registering
Virtual Site
OTAR Rekeying
Battery Level
Talkaround Enabled
Low Battery
Transmit Power Level
Very Low Battery
RX Only
Battery Exhausted
Noise Cancellation Enabled
Battery Charging**
Speaker Muted
Battery Fully Charged**
VDOC
RX Mail
Vote Scanning
TX Disabled
Scanning Enabled
Tones Disabled
Alert(s) Present
PTT Disabled
Emergency
** Smart Battery Only.
Icons (Continued)
Unselected Emergency Unit Selected
Selected Emergency Unit Unselected
Select Zone
Select ZONE from main menu and scroll up and down to select
zone. C indicates Command Tactical Zones and Z indicates
Mixed System Zones. Mixed System Zones are only available if
configured in RPM.
Activate Mission Plan
Popup option menu
From the PROGRAM menu,
highlight and select a mission
plan.
Select ACTIVATE PLAN,
VIEW PLAN INFO, or
CLONE PLAN on the popup
menu. See the Operator
Manual for more information
on the Clone Plan feature.
Copyright© 2009 - 2012 Harris Corporation.
Copyright© 2009- 2012 Harris Corporation.
See the “Status Message” table for a complete list
of messages displayed by the radio.
Encryption Banner or Missed Call Banner. Refer to the
Operator’s Manual for more information.
See the “Icons” table for a
description of the icons
displayed in the status
area.
* Harris logo displays if GPS
has not acquired after power
up.
See the “Status Message” table for a complete list
of messages displayed by the radio.
Encryption Banner or Missed Call Banner. Refer to the
Operator’s Manual for more information.
See the “Icons” table for a
description of the icons
displayed in the status
area.
* Harris logo displays if GPS
has not acquired after power
up.