Harrison Electronics Mr.Backup Z64 - Zip Disk File Management; Z64 BIOS Update Procedures

7
(5) File Management for Zip Disks
File Copy
- Insert the zip disk which has already stored the files ( e.g. game backup files and
BIOS update file ) into the zip drive
- Turn on Z64
- The LCD Screen will display all the game titles and / or BIOS update file in the zip
disk
- Move the Up and Down buttons to choose the file you want to manage and push
Enter button
- Move the Up and Down buttons to choose the options for the file management, either
BIOS Update or Copy
- If you choose Update, please refer to (6) BIOS Update File Operations Procedures
- If you choose Copy and push the Enter button, the system will load the selected file
from the zip disk and store it into the system memory. After loading, the system will
ask you to remove the original zip disk from the zip drive and insert another zip disk
to run the Copy job.
- After completing the Disk to Disk Copy, the system will display the message to
indicate that the Copy is completed
File Deletion
- Insert the zip disk which has already stored the files ( e.g. game backup files, patch
files, and BIOS update file )
- Turn on Z64
- The LCD Screen will display all the files in the zip disk
- Simultaneously push the Up and Down buttons for about 3 seconds. The LCD Screen
will display the Delete option
- Move Up and Down buttons to choose the file you want to delete and push the Enter
button
- The LCD Screen will display the the name of the game you want to delete
- Choose Yes for deletion. Choose No to give up deletion
(6) BIOS Update File Operations Procedures
- Insert the zip disk which has already stored the BIOS update file into the zip drive
- Turn on Z64
- Move the Up and Down buttons to choose the BIOS update file in the zip disk and
push Enter button
- The system will display 2 options for your choice. One is Update ( i.e. BIOS
Update). The other is Copy ( i.e. copy BIOS update file to another zip disk)
- Move the Up and Down buttons to choose Update and push Enter button
- The system will start to update your BIOS inside Z64 device.
- When completed, the system will display Update Completed, Turn Off Z64 on the
LCD Screen
- Turn off Z64 and turn on Z64 again