Need help?Do you have a question about the Harrison Labs M400 and is the answer not in the manual?
General| Brand | Harrison Labs |
|---|---|
| Model | M400 |
| Category | Lathe |
| Language | English |
Covers procedures for lifting and cleaning the machine before operation.
Details installation steps, power requirements, lubrication, and initial operation.
Covers machine capacity and safety rules for operators.
Illustrates the machine's control panel and components.
Details the step-by-step procedure for starting the lathe.
Provides important notes for operating the lathe safely and effectively.
Explains how to mount chucks, faceplates, and other spindle attachments.
Covers the process and parameters for cutting threads on the lathe.
Covers maintenance of drive belts, spindle brake, and clutches.
Details the procedure for adjusting drive clutches.
Covers adjustment of saddle keep strips and cross slide ways.
Explains the procedure for eliminating backlash in the cross slide nut.
Details adjustment for top slide ways and tailstock bed clamp.
Describes the function and adjustment of the torque limiting device.
Explains the operation and adjustment of the spindle brake.
Explains the process for ordering spare parts.
Lists the items within the parts section.
To Next Page