PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
Dubai 3 Seat Swing
(69804012)
ATTENTION:
1. Please read these instructions carefully before assembly
2. Aluminium is soft metal and over tightening may strip thread or break the part
3. DO NOT use power tools
4. Please allow 30 minutes for assembly
5. Although assembly only requires 1 person it is advised that a second person be present to help place into position when fully assembled
ASSEMBLY STEPS:
1. Attach leg (G) to connect tube 1 (H), connect tube 2 (I) and connector (F) with bolts (AA), flat washers (BB) and locknuts (CC) using
spanner (JJ).
2. Attach roof tube (J) to roof (E) with bolts (FF).
3. Attach upper support bar (O) to above assembled leg frame with bolts (DD) and connect bottom support bar (N) with bolts (EE).
4. Fix roof (E) on top with adjustable screws (P) on both sides.
5. Attach armrest (A and B) t seating part (C) with bolts (GG).
6. Attach backrest (D) to assembled sofa with bolts (GG).
7. Attach hanging tube (K and L) to armrest with bolts (GG) and plastic washers (HH).
8. Hanging the assembled sofa to the upper support tube with springs (M).
For more information regarding maintenance of your furniture please visit
http://www.hartmanuk.co.uk/after_care_videos.html
To Next Page
Need help?
General
