Hartmann Veroval DUO CONTROL User Manual

28
English
EN
■ Two short beeps indicate that the USB is connected. ‘ ’ is shown on the
display of the blood pressure monitor while the Veroval
®
duo control is
connected to the PC by the USB cable.
■ Start the data transfer using the ‘medi.connect’ software.
■ If the data transfer was not successful, you will be informed of this by the
Veroval
®
medi.connect software. In that case, remove the connection to the
PC and start the data transfer again.
■ The automatic switch-off function of the blood pressure monitor is deactivated
while the monitor is connected to the PC by USB. To protect the battery life
the USB cable should therefore not remain inserted.
■ A longer beep indicates that the USB is disconnected from the device. The
blood pressure monitor then switches itself off automatically.
IFU_Veroval_dc_SK2_0307661_EN_TR_AE_CN_200918.indd 28 17.10.18 18:03

Hartmann Veroval DUO CONTROL Specifications

General

Brand	Hartmann
Model	Veroval DUO CONTROL
Category	Blood Pressure Monitor
Language	English