To Next PageTo Next Page
Need help?Do you have a question about the Hartzell HC-C2YR-4CF/FC8477A-4 and is the answer not in the manual?
General| Model | HC-C2YR-4CF/FC8477A-4 |
|---|---|
| Category | Aircraft Propeller |
| Type | Constant Speed |
| Blade Count | 4 |
| Pitch Control | Hydraulic |
| Material | Aluminum |
| Manufacturer | Hartzell Propeller Inc. |
Details FAA-established specific life limits for propeller components and the entire propeller.
Explains component life in terms of time since new/overhaul and overhaul procedures.
Identifies critical parts and procedures involving them.
Provides an overview of constant speed, hydraulically actuated propellers.
Explains the theory of operation and model designation for governors.
Details propeller mounting hardware and torque specifications.
Provides general instructions and procedures for metal and composite bulkhead installation.
Details propeller installation procedures for various flange types.
Details procedures for removing propellers based on flange type.
Addresses common propeller issues like hunting, surging, and speed variations.
Details pre-flight inspection procedures for propeller blades and components.
Provides steps for initial run-up, static RPM, and ground idle checks.
Outlines periodic inspection schedules and maintenance procedures.
Details procedures for inspecting blade damage, grease/oil leakage, and vibration.
Covers inspections required after overspeed, lightning strikes, and foreign object impacts.
Specifies lubrication intervals, procedures, and approved lubricants.
Explains the overview, inspection, and modification procedures for dynamic balance.
Covers low pitch stop adjustments for all models and specific spinner types.
Describes high pitch stop adjustment procedures.
Explains the importance of tachometer accuracy and calibration procedures.
