What to do if my HARVEY Dust Collector shows 'Over current' error?
If you're getting an 'Over current' error with your HARVEY Dust Collector, try these steps: First, reduce the cord length to less than 15 meters. Then, inspect the motor cord and motor for any short circuits or incorrect grounding. Finally, check if the motor is overloaded or stalled, and consider reducing the speed.
What to do if the motor overheated on my HARVEY Dust Collector?
If the motor of your HARVEY Dust Collector is overheated, check if the motor is overloaded or stalled, and consider reducing the speed.
General| Brand | HARVEY |
|---|---|
| Model | Gyro Air G-1000 |
| Category | Computer Hardware |
| Language | English |
Explains the necessity of proper grounding for safety and electrical integrity.
Outlines essential safety rules and warnings for operating the machine.
Rules for workplace cleanliness, proper usage, and fire precautions.
Measures for static electricity, hazardous dust, and impeller safety.
Guide to operating the machine using its touch screen interface and its four sections.
Covers setting up start/stop modes, running modes, and delayed stop functions.
Details the function of the Start/Stop, Filter dust cleaning, and Re-link buttons.
Configures dust cleaning parameters and selects modes like automatic or manual cleaning.
Procedures for cleaning or replacing filters when pressure drop alarms occur.
Actions to take when dust bin is full or pressure drop alarms are triggered.
To Next Page