12
5. Assembly of joints crossbar/uprights:
Lay crossbar and uprights on the ground, groove facing upwards and straight uprights’
ends facing to the crossbar.
To fix net hoops and net hoop braces 6 nuts are already provided in the crossbar. Push
them in the goal corners, at first from the outside 2 nuts M8, length 40 mm and then 1
nut M6, length 20mm.
Push 1 nut each, length 40mm, M8 into the welded plates of the crossbar and into the
upper uprights’ ends (see 1
st
picture bottom right).
To Next Page
