Hasselblad 500C/M - Camera Accessories; Tripod Attachment

20
Fig 44
Figs 46—47
ACCESSORIES
Lens bayonet mounts
Hasselblad lenses with a 60mm (ว accessory
mount have an internal bayonet mount for
filters and Proxars and an external bayonet
mount for lens shades and ringlight.
Tripod attachment (Fig. 45)
There is a tripod plate (38) on the base of the
Hasselblad 500C/M and SOOEL/M. It has a
1/4" and a 3/8" tripod socket.
STRAP LUGS
Strap attachment (Fig. 46)
Place the main body of the strap clip onto one
of the camera's strap lugs (18). Press down on
the tip of the clip and pull back so the strap
lug slips into the opening at the tip of the clip.
Repeat this procedure on the other side of the
camera.
Strap removal
Lift the clip locking plate and slide the clip
forward. The clip will then slide off the strap
lug.
Accessory rail (Fig. 47)
The accessory rail (39) is used as the seat for
e.g. the sports viewfinder, spirit level, or
adjustable flash.