Hasselblad 907X User Manual

CFV 100C
User Manual
CONTENTS
22
1.6 USING CFV 100C WITH 907X
Mounting CFV 100C and 907X
1. Remove the rear protective cover of the 907X camera body by pressing on the top of the
cover (1) and then swinging it backwards (2).
2. Press and hold the lock button on the top of the digital back and push it in the direction
as shown in the figure (3) and remove the protective cover (4).
3. Attach the lower supports on the 907X to the slots on the bottom of the digital back (5).
4. Press and hold the lock button, and then push it in the direction as shown in the figure (6),
while mounting the 907X to the digital back completely (7). A click indicates that the two
devices are securely attached (8).
CFV 100C907X
1
3
2 4
5
8
7
6

Hasselblad 907X Specifications

General

Sensor Type	CMOS
Sensor Size	43.8 x 32.9 mm
Effective Pixels	50MP
ISO Sensitivity	ISO 100-25600
Continuous Shooting Speed	2.7 fps
Battery Type	Rechargeable Li-ion Battery
Display Type	TFT LCD
Display Size	3.0-inch
Storage Media	SD, SDHC, SDXC
Connectivity	USB Type-C, Wi-Fi
Viewfinder	Optional
Shutter Speed	60 min to 1/2000 sec