DIGITAL BACKS
www.hasselblad.com
555 ELD
500 EL/ELM
500/553 ELX
500 C/CM
501 C/CM
503 CX/CXi/CW
SWC / SWC/M
903 SWC
905 SWC
Modied 202FA/203 FE / 205 TCC / 205 FCC
With F type lenses and CF type lenses at
F-mode setting
Note:
For exposures
longer than 1/8
second, use the sup-
plied Flash input
sync cable.
This applies to all
models and
combinations.
CFV II digital back
2000 FC / FCM
2003 FCW
201 F / 203 FE
205 TCC / FCC
With C type lenses
(C-mode setting)
Any view camera
with Hasselblad V
system adapter
FlexBody,
ArcBody (Not recommended for critical use).
No ‘Exposure’
cable required
(except for long exposures)
‘Exposure’
cable always
required
‘Exposure’
cable required
for control
from
FlexColor or
Phocus
(NOTE : only these cam-
eras/combinations can be
controlled from FlexColor
or Phocus)
Connectivity
diagram
503 CW +
Winder CW
500 EL/ELM
500/553 ELX
+
+
+
Flash input
sync cable
+
+
Battery adapter required for
portable use.
Exposure Cable EL required
for w control of EL/ELM and
ELX use.
Exposure cable 503 CW
required for FlexColor
or Phocus control of
503CW+Winder CW.
Battery adapter required for
portable use.
(Not recommended for critical use).
UK – v2