114
H4D
6
21
4.2 Image Info
In Image info you can compose your own combination of letters,
words, symbols, etc to be included in the metadata. The same
procedure is also used to change a Profile name.
Text setting
1) Press the MENU button on the grip.
2) Turn the front control wheel until Settings appears.
3) Press Enter (ISO/WB button) on the grip.
4) Turn the front control wheel to access 4.2 Image info.
5) Press Enter (ISO/WB button) to access the list of characters
and figures available.
6) By turning the front control wheel, the character selector cur-
sor will move to the left and right in the available characters
while the rear control wheel moves it up and down. The chart
of characters will automatically scroll to reveal the whole set.
The space character is top left in the list.
On the left side of the screen there is a small box frame con-
taining two arrow symbols and an X symbol. By selecting the
arrows you can position the cursor in the line of text you have
created. The X symbol deletes the selected character.
To create a line of text, select the desired character and press
then Sel (AF button). That character is then automatically
added to the line of text below the character chart. Press
Save (ISO/WB button) to store the new setting.
MENU
F
Enter
ISO/WB
F
Enter
ISO/WB
3 4
5
Enter
ISO/WB
7
4.2 Image Info
To Next Page
Loading...
