24
H4D
3
Photo: Nina Berman / Hasselblad Masters
Aluminium cast in one piece
Stainless steel shell
Integral quick-coupling plate
Upgradeable firmware
Modular design
Integral ergonomic grip
Pixel based user interface
The H4D camera body is a robust construction of cast alu-
minium with a stainless steel shell for extreme durability.
The integral ergonomic grip houses the main control interface
and also contains the battery holder. The camera body also
contains the viewfinder screen, which can be easily removed
or exchanged without the use of special tools or adjustment
procedures.
Please take extra care when handling the camera body with-
out a protective cover or the sensor unit in place to pro-
tect the auxiliary shutter. Likewise, the front opening of the
camera body reveals the mirror when unprotected by a cover
or lens. Do not touch or attempt to clean the mirror yourself
– marks or dust particles will not impair results in any case.
More noticeable problems, however, should be taken care of
by a Hasselblad Authorized Service Center.
Camera Body
To Next Page
Loading...
