55
H4D
The menu is structured in a manner similar to mobile/cell phones and similar small electronic
devices. Various branches within the tree system are accessed by pressing the navigation
button until you reach the point where a choice has to be made.
The OK (Approve) button or SELECTION (ZOOM IN / ZOOM OUT) buttons are then used to
confirm choice.
Both the front and rear control wheels can also be used to navigate the menu. The rear control
wheel navigates up and down the menu list and the front control wheel navigates sideways in
the direction of the menu arrows. The front control wheel also functions in the same as way
as the plus and minus button functions for settings choice.
Introductory overview of menu access, navigation and settings choice.
After pressing the MENU button, the main menu list appears. The blue frame
highlights where you are on the menu. Press on the ‘up’ and ‘down’ symbols on the
navigation button to move up and down the list.
You can return to the standard image view by pressing either on the ‘left’ symbol on
the navigation button or on the EXIT/MENU button again.
The need to continue further into the menu is indicated by the arrow symbol beside
the menu item.
Press the ‘right’ arrow symbol on the navigation button to access the next part of
the menu.
When you reach the final destination of your choice (this might take several moves),
PLUS and MINUS symbols appear to the right in the frame round the item. You then
press the ZOOM IN / ZOOM OUT buttons to access a loop list of choices.
In the example on the left, 100 is the ISO value shown. By pressing either button the
alternatives appear – 200, 400, etc and then back to 100 again. Pressing the EXIT/
MENU button will then confirm the new setting.
In the next example on the left, the name of a new batch is changed by pressing a
combination of the ZOOM IN / ZOOM OUT buttons as well as the navigation button.
You can then confirm your choice with the OK (
) button or revert to the previous
status by pressing the EXIT ( ) button. Note that how the MENU button is now
described as EXIT on the display, and the Approval button is described as the OK
button. See later sections for more comprehensive information.
The FLASH but-
ton on the grip also
acts as a menu EXIT
button and the ISO /
WB button acts as an
OK button.
The rear control wheel navigates up and
down the menu list and the front control
wheel navigates sideways in the direc-
tion of the menu arrows.
The front control wheel also functions
in the same as way as the ZOOM IN and
ZOOM OUT button functions for set-
tings choice.
(The wheel can be set in Custom Options
#17).
To Next Page
Loading...
