74
H4D
6
Camera information
By holding down the View Mode button (toggle function) you can dis-
play most of the current shooting-related information (as simultaneously
shown on the grip LCD) such as: aperture setting, shutter speed, flash in-
dication, focus setting, drive, EV, battery status, exposure method, capture
counter, ISO and white balance.
Full Details Mode 4
In full-details mode, you can read a complete list of camera settings, plus see the
histogram and, in the background, a darkened preview of the image. The camera-setting
details are stored with the image, so you can refer to them using Phocus even after you
have loaded the image to your computer and stored it in your archive.
Battery-Saver Mode 5
In this mode, the sensor unit is fully responsive, so you can make captures but the screen
is not lit up, thereby saving battery power.
You can enter the menu system while shooting in this mode (which activates the screen
until you exit the menu system again) but the approval, zoom and navigator buttons
have no effect.
Full-Screen Mode 6
In full-screen mode, you can browse your images at standard preview resolution without
any distracting data surrounding them.
Because the current approval setting is not shown in full-screen mode, the approval
button has no effect. This will prevent you from accidentally assigning the wrong status
without knowing it.
Tip
You can save battery power by turning
down the brightness and/or contrast
of the display. See User Interface for
details.
Tip
Other ways to save battery power
include setting a display time-out and/
or a power-down time-out (each of
these is disabled by default).
4
5
To Next Page
Loading...
