Hasselblad H4D-200 MS - Deleting by Approval Status

80
H4D
  
Deleting by approval status
There are several ways to delete images, including approval
status. You can choose to delete:
 • Allred-statusimagesfromtheselectedbatchormedium
 • Allred-andyellow-statusimagesfromtheselectedbatchor
medium
 • Allimagesfromtheselectedbatchormedium
roceed as follows:
1. Starting at the single-image preview display, Select MAIN
MENU > STORAGE > Delete.
2. Use  to enter the Delete submenu or use shortcut.
3. Use the
–
or
+
button to select:
A. This image - deletes the current image only
B. All red in batch - deletes all red images in the current
batch
C. All yellow/red in batch - deletes all yellow and red
images in the current batch
D. All in batch - deletes all images in the current batch
4. Press OK to confirm the delete (to exit without delete, press
EXIT).
5. You now return to the main menu. Press the menu (EXIT)
button to exit the menu system.
For other kinds of delete, also see under Delete.
1 2
3
A.
B.
C.
D.
4 5