EasyManua.ls Logo

Hasselblad SWC/M - Depth-of-field indicators

Hasselblad SWC/M
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Objects
on
the
near
or
far
side
of
the
set
dis-
tance
may
also
be
in
focus
within
certain
lim-
its.
The
limits
for
this
area
of
sharp
focus,
depth
of
field,
vary
with
the
aperture.
A
small
aperture
yields
wide
depth
of
field,
a
large
aperture
yields
shallow
depth
of
field.
The
depth
of
field
available
at
any
given
aper-
ture
is
automatically
designated
on
the
dis-
tance
scale
by
the
depth-of-field
indicators.
There
is
greater
depth
of
field
on
the
far
side
of
the
distance
set
than
on
the
near
side.
Depth-of-field
indicators
(Fig.
65)
The
automatic
depth-of-field
indicators
(11)
greatly
simplify
focusing.
They
consist
of
two
moving
pointers.
The
distance
between
the
pointers
changes
when
the
aperture
setting
is
changed.
The
largest
aperture
provides
shal-
low
depth
of
field,
so
the
distance
between
the
pointers
is
narrow
at
this
f/stop.
A
small
aperture,
such
as
f/22,
yields
wide
depth
of
field,
and
the
distance
between
pointers
is
then
wide.
See
Fig.
65.
The
thin
ring
shows
the
position
of
the
depth-of-field
indicators
at
the
largest
aperture
(f/2.8).
The
thick
ring
shows
the
position
at
the
smallest
aperture
(f/22).
Some
practical
tips
Proceed
as
follows
if
you
have
predetermined
a
desired
depth
of
field.
Focus
on
the
closest
part
of
the
subject
and
read
off
the
distance
on
the
distance
scale.
Do
the
same
thing
for
the
most
distant
part
of
the
subject.
Set
the
depth-of-field
indicators
so
they
point
to
the
two
distances
obtained.
In
sports
photogra-
phy,
for
example,
you
can
preset
the
depth-
of-field
indicators
to
the
desired
depth
of
fi-
eld.
All
the
action
within
these
preset
distance
limits
will
then
be
in
sharp
focus.
Fig
64
Fig
65
812%
B15
ро
вот
20161
85628
|
1
๐0
М
214%

Related product manuals