Hasselblad SWC/M - Page 43

SERVICE AND MAINTENANCE
Cameras and lenses subjected to heavy-duty professional use
should be serviced regularly at an authorized Hasselblad
service center. We recommend regular checkups to ensure
maximum operating reliability.
Lubricants can dry up in cameras put aside for any length of
time, e.g. six months or more. The high-precision mechanism
in a leaf shutter, for example, could then malfunction. So a
stored camera should be taken out from time to time and
operated at each shutter speed a few times.
It is especially important to “loosen up” the shutter before
working with the camera for the first time after a long period
of disuse. First operate the camera without a magazine
attached. Look through the camera body and lens to ensure
that all the shutter speeds are working.
WARRANTY
The Hasselblad cameras are made in Góteborg, Sweden.
They
are
products
of
the
highest
quality
and
are
therefore
warranted
against
defects
in
workmanship
and
materials
for
a
period
of
twelve
months
from
the
date
of
purchase.
Please fill in and mail the enclosed registration card as soon
as
you
take
delivery
of
your
new
camera.
Please
print
clearly.
The warranty certificate will be sent to you as soon as we
receive
your
registration
card.
We
will
also
put
you
on
our
mailing list and send you our printed matter as it is
published.
Damage
caused
to
the
camera
by
improper
use
is
not
covered
by
the
terms
of
the
warranty.
Shipping
costs
to
and
from
the
nearest
Hasselblad
authorized
service
center
will
be
defrayed
by
the
camera
owner.
VICTOR HASSELBLAD AKTIEBOLAG
Box 220, S-40123 Góteborg, Sweden
10022
GB
Printed
in
Sweden
11
6
1982
Hammar
Offsettryck
AB