Hasselblad X1D II 50C - Remove SD Memory Cards

REMOVE SD MEMORY CARDS
Note!
Do not remove a memory card from the
Camera if the ‘ready’ light is blinking (placed
in the lower right corner on the Touch Display),
as this will corrupt the les on the card and
result in data loss.
Remove SD card
1 Open the memory card slot cover on the
Camera (A) .
2 Press the SD card no 1 (B) or no 2 (C) a
little way in and then release it. The SD
card will then move out from the SD card
slot.
3 Grab the card and pull it away from the
Camera.
4 Close the slot cover (D) by rotating it
counter clockwise and pushing it in place
towards the front of the camera to lock it
into position.
A
B
C
D
X1D II 50C USER GUIDE www.hasselblad.com
66
FUNCTIONS
Contents