Hasselblad X1D II 50C - Stop down Button

STOP DOWN / DEPTH-OF-FIELD PREVIEW
Stop Down functionality
The Aperture normally stops down only during the exposure.
In all other situations the Aperture is completely open.
The Viewnder and the Touch Display will, as a result, show
a narrow depth-of-eld regardless of the current Aperture
setting.
How to preview the depth-of-eld
A visual depth-of-eld preview check can be made by follow-
ing these instructions.
1 Press the STOP DOWN button (A) .
2 Hold the button (A) pressed down.
3 The lens is stopped down to the current Aperture setting.
4 A depth-of-eld preview is displayed in the Viewnder and
on the Touch Display screen, as long as the STOP DOWN
button (A) is completely pressed down.
5 Verify the depth-of-eld optically in the Viewnder or on
the Touch Display screen.
6 Release the STOP DOWN button (A) to open up the
Aperture fully again.
Note!
Depth-of-eld is not absolute. Perception of it depends on
several factors and so it should be seen only as a rough guide.
4.13 STOP DOWN BUTTON
A
X1D II 50C USER GUIDE www.hasselblad.com
68
FUNCTIONS
Contents