Hasselblad X1D II 50C User Manual

ISO AND WHITE BALANCE
ISO and White Balance are set either on the Camera Grip, the
Touch Display or, when tethered, in Phocus.
● On the Camera Grip, the ISO / WB Button (A) provides
immediate access to ISO and White Balance settings.
The front scroll wheel (B) and Rear Scroll Wheel (C)
are used to make the desired changes. These appear
on the Touch Display and in the Electronic Viewnder
(EVF).
● For the Touch Display, settings are changed on the
Touch Display or by using the buttons next to the
display.
The settings are automatically and simultaneously adjusted
within the Camera and changes display on both the Touch
Display and in the Electronic Viewnder.
Note!
The changes are only displayed on the Touch Display after
the settings have been saved. See more information about
making manual White Balance settings in the ‘Touch Display
Settings’ section.
ISO
1 Press ISO / WB button (A) .
2 Turn the Front Scroll Wheel (B) to select ISO setting.
White Balance WB
1 Press ISO / WB button (A) .
2 Turn the Front Scroll Wheel (B) to select WB (Auto AWB,
Daylight, Shade, Cloudy, Flash, Fluorescent, Tungsten or
Manual WB).
3 To set the Colour Temperature manually, turn the Front
Scroll Wheel (B) until “M/WB” is displayed. Then the
Colour Temperature value is displayed at the bottom of
the screen.
4 Use the Rear Scroll Wheel (C) to set the Manual WB.
Note!
White Balance settings are technically not necessary for RAW
3F/3FR les. The raw format les contain all the information
required for correction in Phocus and/or other software,
regardless of the original colour temperature of the light
source or colour temperature setting of the camera at the time
of exposure.
If you intend to shoot RAW & JPEG or use Phocus for JPEG
production and plan to deliver or print the JPEG les directly,
then you should make a White Balance setting.
Note!
ISO and White Balance settings are made either on the
Camera Grip or the Touch Display. The settings are automat-
ically updated on both the Touch Display and the Electronic
Viewnder.
A
B
C
X1D II 50C USER GUIDE www.hasselblad.com
80
FUNCTIONS
Contents

Hasselblad X1D II 50C Specifications

General

Megapixel	50 MP
Camera type	MILC Body
Sensor type	CMOS
Image sensor size	- \
Image formats supported	JPEG, RAW
Maximum image resolution	8272 x 6200 pixels
Image sensor size (W x H)	43.8 x 32.9 mm
Still image resolution(s)	-
Wi-Fi	Yes
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
USB version	3.2 Gen 1 (3.1 Gen 1)
USB connector	USB Type-C
Headphone outputs	1
Optical zoom	- x
Shooting modes	Auto, Manual
Self-timer delay	- s
Product color	Black
Battery voltage	7.27 V
Battery capacity	3400 mAh
Battery recharge time	2 h
Magnification	0.87 x
Viewfinder type	Electronic
Viewfinder resolution	3690000 pixels
Display diagonal	3.6 \
Display resolution (numeric)	2360000 pixels
Memory slots	2
Compatible memory cards	SD
Operating temperature (T-T)	-10 - 45 °C
Maximum video resolution	- pixels
Flash range (wide)	- m
Fastest camera shutter speed	1/10000 s
Slowest camera shutter speed	4080 s
Light metering	Centre-weighted, Evaluative (Multi-pattern), Spot
ISO sensitivity	100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600
Light exposure modes	Auto
ISO sensitivity (max)	25600
ISO sensitivity (min)	100
Focus adjustment	Auto/Manual

Weight and Dimensions

Depth	70 mm
Width	148 mm
Height	97 mm
Weight	650 g
Weight (including battery)	766 g