Hatco HEATMAX RCTHW-6 Series User Manual (English)

Questions and Answers:

K
Kimberly FischerAug 4, 2025
What to do if my Hatco Pasta Maker has no heat?
- B
  barnesdawnAug 4, 2025
  If your Hatco Pasta Maker isn't heating up, there are several potential causes. First, ensure the unit is turned on using the ON/OFF button. If it still doesn't heat, check the circuit breaker and reset it if tripped. If the breaker continues to trip, or if the temperature control or heating element isn't working, you should contact an Authorized Service Agent or Hatco for assistance. Also, make sure the well is clean and filled to the proper level with water, as heavy scale build-up or operating the unit without water can cause the high-limit switch to trip.
S
Sabrina SmithAug 14, 2025
Why is my Hatco Pasta Maker food well not hot enough?
- J
  Jeffrey MurphyAug 14, 2025
  Several factors can cause the food well in your Hatco Pasta Maker to not reach the desired temperature. It could be due to a temperature setting that is too low; in this case, use the TEMP button to increase the temperature setting. Also, verify that the correct voltage is supplied to the unit, as low voltage can cause improper heating. If the heating element or temperature control is not working properly, contact an Authorized Service Agent or Hatco for assistance.
M
Michael TorresAug 25, 2025
What to do if my Hatco Pasta Maker food well is too hot?
- S
  shayesAug 25, 2025
  If the food well in your Hatco Pasta Maker is overheating, it might be due to a temperature setting that is too high. Try using the TEMP button to lower the temperature setting. Also, verify the correct voltage is supplied to the unit, as high voltage can cause overheating and may damage the unit. If the temperature control is not working properly, contact an Authorized Service Agent or Hatco for assistance.