1B20, 1B27, 1B30, 1B40, 1B50 Safety
HATZ
17Operator's Manual
Measures following maintenance and troubleshooting
▪ Securely reconnect loose electrical connections; check that the electrical
components and equipment are functioning properly.
▪ Check the entire machine for foreign bodies; remove any foreign bodies.
Safety instructions for maintenance work
DANGER
Danger of explosion from flammable cleaning agents.
Cleaning with benzene is an explosion hazard. It is highly
flammable, can become electrostatically charged, and can gen-
erate an explosive gas/air mixture.
▪ Use halogen-free, cold cleaners with a high flashpoint for
cleaning.
▪ Comply with manufacturer's instructions.
WARNING
Danger of injury from compressed air and dust particles.
Eye injuries may occur when cleaning with compressed air.
▪ Wear safety goggles.
CAUTION
Danger of injury if maintenance instructions are not fol-
lowed.
▪ Only perform maintenance when the engine is switched off.
▪ Protect start-up devices (crank handle, recoil start or start-
ing key) from unauthorized access.
▪ For engines with a starter: Disconnect the negative battery
terminal.
▪ When the maintenance work has been completed, ensure
that all tools are removed from the machine.
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine.
▪ Let the engine cool before maintenance.
To Next Page
Loading...
