Transport, assembly and commissioning 1B20, 1B27, 1B30, 1B40, 1B50
32
HATZ
Operator's Manual
6.4 Filling engine oil (first filling)
Engines are normally delivered without an engine oil filling.
Safety notes
CAUTION
Danger of injury
Prolonged contact with engine oil can lead to irritation of the
skin.
▪ Wear safety gloves.
▪ If there is contact with the skin, thoroughly wash the af-
fected areas of the skin with soap and water.
CAUTION
Danger of later engine damage.
▪ Operating the engine with an oil level below the min. mark
or above the max. mark can lead to engine damage.
▪ When checking the oil level, the engine must be horizontal
and have been switched off for a few minutes.
Overview
1 Dipstick
2 Oil refilling container
Procedure
Step Activity
1 Unscrew the dipstick (1) and clean it.
2 Fill engine oil. For the specification and viscosity, see chapter
4.4 Engine oil, page 25. See chapter 4.1 Engine information and
filling quantities, page 22 for the engine oil capacity.
To Next Page
Loading...
