Hatz 1B30 - 7.4 Starting the engine

Operation and use 1B20, 1B27, 1B30, 1B40, 1B50
38
HATZ
Operator's Manual
7.4.1 Starting the engine with recoil start (up to -6 °C)
Overview
1 Grip
2 Recoil start cover
3 Diagram of starting procedure
Procedure
Step Activity
1 Check the speed adjustment (see chapter 7.3 Setting the speed
control, page 36).
2 Slowly pull out the grip with the rope until you encounter slight
resistance.
3 Let the rope run back in to be able to use the entire rope length
for the starting procedure.
4 Hold the grip with both hands.
5 Pull the starting rope evenly and with increasing speed (do not
tear at it jerkily) until the engine starts.