1B20, 1B27, 1B30, 1B40, 1B50 Maintenance
HATZ
55Operator's Manual
8 Maintenance
8.1 General maintenance instructions
Safety notes
WARNING
Danger of injury from failure to follow the operating instruc-
tions and from performing unauthorized tasks on the ma-
chine.
▪ Follow all instructions.
▪ Do not perform activities for which no qualification is avail-
able. Contact properly trained personnel if necessary.
NOTICE
Comply with the safety chapter!
Follow the basic safety instructions in chapter 3 Safety, page 7.
▪ Maintenance tasks may only be performed by trained personnel.
▪ Accident prevention measures must be in accordance with the local acci-
dent prevention regulations.
▪ Perform setting and maintenance work at the specified intervals.
▪ Replace faulty machine parts as soon as possible.
▪ Always use personal protective equipment.
▪ Only use fully functional tools.
▪ Problems may occur if unsuitable spare parts have been installed. We
cannot accept responsibility for damage and secondary damage that result
from this. We therefore recommend the use of genuine Hatz original
spare parts.
▪ Closely adhere to the maintenance conditions prescribed in this Operators
Manual.
▪ Only make changes on the machine in agreement with the manufacturer.
▪ Only perform maintenance when the engine is switched off.
▪ Protect start-up devices (crank handle, recoil start or starting key) from
unauthorized access.
▪ After completing maintenance work, check that all tools, bolts, aids, and
other objects are removed from the machine and that all safety equipment
has been replaced.
▪ Before starting, ensure that no persons are located in the danger zone of
the engine or machine.
To Next Page
Loading...
