1B20, 1B27, 1B30, 1B40, 1B50 Maintenance
HATZ
67Operator's Manual
Step Activity Figure
2 Remove the screws and nuts.
Remove the sound protection
hood (2).
Procedure
NOTICE
The steps described here can only be performed after the ap-
propriate preparations have been completed.
Step Activity Figure
1 Remove dirt in the area of the
cylinder head cover (1).
2 Remove the screws (2).
(2 screws in 1B20, 1B27 and
1B30, 3 screws in 1B40 and
1B50).
3 Take off the cover (3) with the
gasket (4).
To Next Page
Loading...
