Hatz 3H50 Series - Page 22

Technical data 3H50, 4H50
22
HATZ
Manual
5)
Permissible sloping position for a maximum of 7 hours. After this period,
return the engine from the sloping position to the horizontal position and
switch it off for at least 5minutes. Merely a reduction in the sloping position
is not sufficient.
Engine specifications
Model Description
T With turbocharger.
TI with turbocharger and charge air cooling.
TIC With turbocharger, charge air cooling, cooled ex-
haust gas recirculation (EGR) and diesel oxidation
catalyst (DOC)
TICD With turbocharger, charge air cooling, cooled ex-
haust gas recirculation (EGR), diesel oxidation cata-
lyst (DOC) and diesel particulate filter (DPF).
OPU Open Power Unit.
Complete system with all components required for
engine cooling.
Silent Pack Open Power Unit with noise and weather protection
capsule.
Weights (without operating fluids)
Model
Standard OPU Silent Pack
Type Weight in kg
3H50 T 132 * – –
3H50 TI 133 * 215 312
3H50 TIC 154 * 236 333
3H50 TICD 161 * 243 345
4H50 Ti 152 * 234 333
4H50 TIC 173 * 255 354
4H50 TICD 180 * 262 366
* Without radiator.
Screw tightening torque
Designation Nm
Oil drain screw 50
Drain plug on the radiator 50