Hauck Candy - Pushchair Operation and Assembly Guide; Erecting, Unfolding, and Folding Procedures; Wheel Assembly, Adjustment, and Braking; Seat and Harness Securing

8
GB
INSTRUCTION OF USE
1. ERECTING (󻉓g 1).
Release transport lock.
2. UNFOLDING (󻉓g. 2a, 2b)
Tip forward to open the stroller, and press down both cross bars (top & bottom) at the back of
the stroller until they are securely engaged.
3. FRONT WHEEL ASSEMBLY (󻉓g. 3a, 3b)
Push both front wheels into position. Make sure the pushpin locks in place and cannot be pull
o󻉒. When changing the wheel, lie the stroller down in fully assembled state. Press both levers
on the wheel frame and pull complete double wheel out to the front.
4. FRONT WHEEL ADJUSTMENT (󻉓g 4)
Slide the front wheel lever down to lock the swivel movement. To release the swivel movement,
slide the lever up.
5. TWIN BRAKE FOR REAR WHEELS (󻉓g. 5)
Press both brakes down to stop the rear wheels and push the stroller to check.
Attention: Always apply both brakes when parking the stroller.
6. ADJUSTING THE BACK REST (󻉓g. 6)
Push up the adjustor at the back of the seat, and bring the backrest to the desired position.
Ensure the left & right position locks are always 󻉓xed in the same level. The back rest can be
altered to 4 di󻉒erent seat positions.
7. ADJUSTING THE LEG REST (󻉓g. 7)
Press both (left & right) buttons to bring the leg rest to the desired position.
8. CANOPY ASSEMBLY (󻉓g. 8)
Attach the clamping device of the canopy to both sides of the stroller frame.
9. FOLDING AWAY (󻉓g. 9):
Return the backrest to the sitting position.
i. Pull up the handle grip at the back of the seat to release the base lock;
ii. press down the upper safety lock by your foot and push the handle forward to close the
stroller;
Secure the stroller with the transport lock
10. SECURE THE CHILD IN THE SEAT (󻉓g 10):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt
(the one that comes between the child’s legs). Adjust the length of the belt to your child’s needs.
Always ensure the straps are not twisted or caught on the stroller frame. Check the adjustment
every time you place the child in the seat and when the backrest is reclined. To release the
harness, squeeze & open the buckle.
Harness adjustment: Insert both fasteners (B) into the buckle (A), ensure that both buttons click
into position. Ensure both shoulder straps (C) are attached to the fasteners (B). Each strap has
its own length adjuster (D). To undo the harness, press the button and pull apart. “D” Rings are
provided for 󻉓tment of a full safety harness. The attachment points (D-rings) are located on side
straps.
WARNING: (A child’s safety is your responsibility.) The child should be harnessed in at all times
and should never be left unattended. The child should be clear of moving parts while making
adjustments. This stroller requires regular maintenance by the user.
Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use
as instructed. Never use the harness without the shoulder straps.
11. ADJUSTING THE SHOULDER HARNESS (󻉓g. 11)
There are 2 shoulder harness height available in the stroller, use the slot closest to child’s
shoulder height.
UPKEEP AND MAINTENANCE
In General
Please check the pushchair functions on a regular basis. Make sure that the frame is stable, the
screws are tight, the latching devices are safely locked, the wheels are securely attached and the
brakes are in working order. Check the cover occasionally, making sure that the stitching is still 󻉓rm,