106 4001001030 E 06.20 USA / GB
E- General Specifications
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
5 - Options
5.1 - P
IPE
HOLDER
OPTION
5.1.1 - Description
This attachment is an assembly designed to transport pipes and tubes. The assembly
comprises of 2 cradles securely attached to the platform. The tube should be placed in the
cradles and securely fixed to them with a strap.
5.1.2 - Characteristics
5.1.3 - Safety precautions
Specifications
COMPACT 8 / 10 N COMPACT 2032E / 2632E
SI Imp.
Weight of the carrier 9 kg 20 lbs
Weight of the equipment on the carrier 50 kg 110 lbs
Maximum load surface 0,6 m² (Ø 0,2 m x 3 m) 6.46 sq.ft (Ø 8 in x 9 ft 10 in)
Maximum wind speed allowed 0 m/s - 0 km/h 0 mph
Specifications
COMPACT 8W / 10 / 12 / 14 COMPACT 2247E / 2747E / 3347E / 3947E
SI Imp.
Weight of the carrier 9 kg 20 lbs
Weight of the equipment on the carrier 70 kg 154 lbs
Maximum load surface 0,6 m² (Ø 0,2 m x 3 m) 6.46 sq.ft (Ø 8 in x 9 ft 10 in)
Maximum wind speed allowed 0 m/s - 0 km/h 0 mph
• Please read and assimilate the instructions before using the attachment.
• This attachment is designed for transporting pipes and tubes. Do not use this attachment for
transporting other types of load.
• Do not suspend loads.
• Do not overload the attachment and ensure that the material is correctly attached by straps.
• Do not exceed the maximum allowable platform capacity. The combined weight of the attachment, load,
the occupants, the tools and any other equipment must not exceed the maximum allowable platform
capacity.
• Do not load tubes whose surface area exceeds the maximum authorized surface area. Exposing an
additional surface area to the wind reduces machine stability. Do not install any other attachments that
increase the surface area exposed to the wind.
• Do not use the machine if the wind speed exceeds the authorized limit of the attachment.
• The cradles should always be positioned such that they are within the platform. Position the bottom end
of the cradles such that they are resting on the platform floor.
• When maneuvring, ensure you maintain a safe distance between the load and the obstacles in the work
environment.
To Next Page
Loading...
