89 4001001030 E 06.20 USA / GB
D- Operation instructions
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
5.8.3 - Loading and unloading with forklift
Unloading
• While lifting, make sure that the load is evenly spread.
• Put down the machine.
• Platform must be fully lowered.
• Manual extension deck(s) must be fully retracted and locked in position. The machine must
be in the fully stowed transport position.
• Ensure that the machine controls are in the OFF position.
• Use a forklift with sufficient strength to lift the machine.
• Move the forks apart.
• Place the forks in the positions indicated on the chassis.
• Slowly place the forks in position with forklift pockets to ensure optimum stability.
To Next Page
Loading...
