Haulotte HA16RTJ - 3 Inspection program

3 Inspection program
3.1 General program
The machine must be inspected on a regular basis at intervals of no less than once 1per year.  The purpose
of the inspection is to detect any defect which could lead to an accident during routine use of the machine.
Local standards and regulations may require more frequent inspections.
HAULOTTE® requires Reinforced and Major Inspections to be carried out on the product to extend its
service life.
Inspections must be carried out by a competent company or person.
The inspection results must be recorded in the safety register or machine log book controlled and overseen
by the company manager. This register or machine log book and the list of competent repair persons must
be made available to the government work inspector andHAULOTTE Services®.
When Person-in-charge Stakeholder What
Before sale Owner (or renter)
Competent technician or qualified
technicianHAULOTTE Service®
Periodic inspection
Before rent Owner (or renter)
Competent technician or qualified
technicianHAULOTTE Service®
Daily inspection
Before use or every
change of user
Operator Operator Daily inspection
Annually (1year) Owner (or renter)
Competent technician or qualified
technicianHAULOTTE Service®
Periodic inspection
5years Owner (or renter)
Competent technician or qualified
technicianHAULOTTE Service®
Reinforced
inspection
10years Owner (or renter)
Competent technician or qualified
technicianHAULOTTE Service®
Major inspection
3.2 Daily inspection
The Daily inspection includes a visual inspection, operational checks and testing of the safety systems. This
must be conducted by the operator before using the machine.
This inspection is the responsibility of the user. Refer to
C 3.1 - Daily inspection.
3.3 Periodic inspection
The Periodic inspection is a thorough evaluation of the operation and safety features of the machine.
It must be conducted before the sale / resale of the machine and/or at least once every year.
Local regulations may have specific requirements on frequency, and content of inspections.
The severity of operating conditions may require frequent inspections.
This inspection is the responsibility of the owner, and inspections must be carried out by a competent
company or person.
This inspection is in addition to the daily inspection.
This inspection should also be conducted after:
- Extensive dismantling and reassembly of major components.
- Repairs involving the machine's essential components.
- Any accident causing stress to the machine.
HA16RTJ - HA16RTJ O - HA16RTJ PRO - HA46RTJ O - HA46RTJ PRO
F - Maintenance
4001260900 E 10.23 USA / GB F - 5