125
4000715370
E 06.18 - V2
USA / GB
HA20RTJ - HA20RTJ O - HA20RTJ PRO - HA61RTJ O - HA61RTJ PRO
E
- General Specifications
5.2 - GLAZIER'S KIT
5.2.1 - Description
This attachment is an assembly designed to transport panels. The assembly comprises of a
tray that extends along the length of the floor. The panel(s) should be placed in the tray and
secured to the guard rail with a strap (not supplied).
N.B.-:-THIS TRAY CAN BE USED ONLY WITH A SIDE ENTRY PLATFORM.
5.2.2 - Characteristics
5.2.3 - Safety precautions
Component Characteristics
Maximum capacity 115 kg (220 lbs)
Weight of attachment 10 kg (22 lbs)
Maximum load surface 3 m² (32 sq.ft)
Maximum allowable height of the panel 1,20 m (3 ft 11 in)
Maximum allowed wind
CE / AS : 12,5 ms - 45 km/h - 28 mph
ANSI / CSA: 7 ms - 25 km/h - 15 mph
• Please read and assimilate the instructions before using the attachment.
• This attachment is designed for transporting panels. Do not use this attachment for transporting other
types of load
.
•
Do not suspend loads.
• Do not overload the attachment and ensure that the equipment is correctly attached by means of a strap
(not supplied).
• Do not exceed the maximum allowable platform capacity. The combined weight of the attachment, the
panel(s) , the occupants, the tools and any other equipment must not exceed the maximum allowable
platform capa
city.
• Do
not load panels whose surface area exceeds the maximum authorized surface area. Exposing an
additional surface area to the wind reduces machine stability. Do not install any other attachments that
increase the surface area exposed to the wind.
• Check that the position of the panel is not reducing visibility during maneuvers in the work environment.
Do not transport panels whose height exceeds the authorized limi
t.
•
When maneuvering, ensure that a safe distance is maintained between the panel and the obstacles in the
work environment.
• Do not use the machine if the wind speed exceeds the allowable limit with the attachment.
To Next Page
Loading...
