Haulotte HA26 RTJ PRO SW - Page 112

112 4000662720 E 06.17 USA / EN
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
C - Study of the electric schematics
REQUIREMENTS DEFINITION
PLV03
CUT-OFF U D FAILURE CUT-OFF CONDITIONS
6 Failure
1 1 1 KMP relay stuck
211
Active failure on platform level valves and engine is
running
3 1 1 Active failure on LS valve and engine is running
411
Load management system not calibrated and
machine unfolded and not overriding control box
511
Load gauges out of range and machine unfolded
and not overriding control box
611
Load gauges incoherence and machine unfolded
and not overriding control box
711
Low power on load gauges out of range and
machine unfolded and not overriding control box
811
Load management sensors electrical failure and
machine unfolded and not overriding control box
911
Load management sensors logical failure ( IC=1 or
IC=4) and machine unfolded and not overriding
control box
10 1 1 Active failure on CAN
REQUIREMENTS DEFINITION
PLV03
CUT-OFF U D SPECIFIC CUT-OFF CONDITIONS
7 Specific
11N/A
ASB active for platform level and platform control
box active
2
1N/A
Positive platform tilt detector (+10°) active and
platform control box active
N/A 1
Positive platform tilt detector (-10°) active and
platform control box active
311
Time-out after steering, platform rotation or jib
motion