Haulotte HA26 RTJ PRO SW - Oscillating Axles; Validation; Actuators

A
B
C
D
E
F
G
H
I
115 4000662720 E 06.17 USA / EN
C - Study of the electric schematics
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
2.5.13 - Oscillating axles
2.5.13.1 - Validation
2.5.13.2 - Actuators
REQUIREMENTS DEFINITION
OAUV01
The oscillation axle unlock is automatically activated if the function is allowed and not inhibited (all of
models embed oscillating axle function) :
CTRL[OscillatingAxleUnlock]=AU_V_002 & \AU_V_003
REQUIREMENTS DEFINITION
OAUV02
Oscillating axle unlocking is allowed (A) if all the following conditions are satisfied :
VALIDATION A ENABLE CONDITIONS
0 Enable 1 1 Drive is running
REQUIREMENTS DEFINITION
OAUV03
VALIDATION A GENERAL CUT-OFF CONDITIONS
1 General 1 1 Applied speed is micro speed
REQUIREMENTS DEFINITION
OAUA01
The following components drive the oscillating axle unlock function :
• YV101 : Oscillating axle unlocking electrovalve (1/2).
• YV104 : Oscillating axle unlocking electrovalve (2/2).