Haulotte HA26 RTJ PRO SW - Fine Setting of ILS; Proximity Sensors; Arm Sensor SQ420

A
B
C
D
E
F
G
H
I
151 4000662720 E 06.17 USA / EN
E - Adjustments
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
6 - Fine setting of ILS / proximity sensors
The adjustment of these sensors must be accurate as it determines the position of the elements.
6.1 - ARM SENSOR SQ420
Location on machine
Procedure :
• For SQ420, set the gap at 16 mm as shown below (use a shim in order to check it).
Checkings :
• Lift the arm until SQ420 goes ON (around 71° and before the mechanical limit at 73°).