Haulotte HA26 RTJ PRO SW - Arm Sensors SQ421 - SQ423

152 4000662720 E 06.17 USA / EN
E - Adjustments
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
6.2 - ARM SENSORS SQ421 - SQ423
Location on machine
Procedure :
• The ILS SQ421 sensor magnet is attached to the tie rod.
• The maximum (mechanical) play of the tie rod is equal to 6 mm.
• The adjustment must allow detection < 200mm even in the most unfavorable cases (maximum clearance to the
right or to the left).
• Fix the support at the lowest as possible and lock the sensor at 13 mm from its support as shown.