158 4000662720 E 06.17 USA / EN
E
- Adjustments
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
6.6 - TELESCOPIC BOOM FOR DUAL LOAD OPTION SQ521- SQ523 -
SQ532 - SQ533
Location on machine SQ521 - SQ523
Procedure :
• For SQ521, set the gap at 20 mm as shown below (use a shim in order to check it).
• Check that the gap between sensor and frame is around 10 mm.
To Next Page
Loading...
