Haulotte HA26 RTJ PRO SW - The Working Zone Control; Machine Positions

80 4000662720 E 06.17 USA / EN
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
C - Study of the electric schematics
2.4 - THE WORKING ZONE CONTROL
2.4.1 - Machine positions
The function "Machine position" defined the several specific machine position and corresponding
sensors management requirements :
• Transport position (folded) : zone P1.
• 0..770lbs (350Kg) position : zone P1/ P2 / P3 / P4 with dual load capability ( P5 can be reached but telescope
extend and boom descent are then cut).
• 0.. 550lbs (250Kg) position : zone P1 / P2 / P3 / P4 / P5 with dual load and 250kg selected, and single load
capability ( P3 / P4 / P5 are considered as P2 zone).
Description